These clamps are rugged, economical units with versatile mounting options, available as either double or single acting types.  All clamps are constructed of die cast bodies with polished 416 stainless steel piston rods and use BUNA-N seals.  The 1-1/8" bore clams use a sturdy Bronze Rod Bearing while the 2" bore clamps use a Nylon Rod Bearing. The exception to this is the AC-1x1 which uses the head itself as its bearing. These clamps can operate to a max pressure of 150psi and a maximum temperature of 250⁰F.

When ordering spring return models, an F indicates that the rod is normally retracted by the spring.  An R indicates that the rod is normally extended by the spring.

Fluid Power Sales