|
Categories
Departments
|
|
Coro-Flo Regenerative Turbine Pumps
With only one moving part, the impeller, the Coro-Flo
pump handle thin liquids smoothly and quietly. Designed for Propane gas, the
Coro-Flo has found a new market in volatile liquid transfer including liquified gases and
refrigerant gases. A back pull out design allow servicing of the seal and impeller
without disturbing the piping. For maximum flexibility, the inlet and outlet ports
can be rotated into four different positions and are available with 300 lb. ANSI flanges.
Compact and easy installation can be achieved with the "D" Series pumps
which use a special bracket that supports both the motor and the pump eliminating the need
for a baseplate, coupling guards, and coupling alignment. Don't forget your Corken B166 By-Pass valve with the patented vapor
elimination system to keep liquified gas pumps primed with a moderate pressure build up.
Specifications:
|
Model |
Inlet |
Outlet |
Rotation |
Max
RPM |
Maximum
Case Test Pressure PSIG |
Maximum
Working Pressure PSIG |
Maximum
Differential Pressure PSIG |
Horsepower
Range |
Temperature
Range |
Maximum
Viscosity SSU |
|
9 |
1
1/4" NPT |
1"
NPT |
Clockwise Only (From Driven End) |
3600 |
2500 |
400 |
150 |
1/2
to 10 |
-250
to +2250 |
400 |
|
10 |
1 1/4" NPT |
1" NPT |
3600 |
2500 |
400 |
150 |
1/2 to 10 |
-250 to +2250 |
400 |
|
12 |
1
1/2" NPT |
1"
NPT |
3600 |
2500 |
400 |
150 |
1/2
to 10 |
-250
to +2250 |
400 |
|
13 |
1 1/2" NPT |
1" NPT |
3600 |
2500 |
400 |
150 |
1/2 to 10 |
-250 to +2250 |
400 |
|
14 |
1
1/2" NPT |
1"
NPT |
3600 |
2500 |
400 |
150 |
1/2
to 10 |
-250
to +2250 |
400 |
|
15 |
1 1/2" NPT |
1" NPT |
3600 |
2500 |
400 |
150 |
1/2 to 10 |
-250 to +2250 |
400 |
| For models FF9-FF15 Inlet is 1 1/2" ANSI 300 lbs & Outlet is
1" ANSI 300 lbs |
| On LP-Gas Installations a maximum system differential of 125 PSI is
allowed by Underwriters' Laboratories and NFPA No. 58 |
 Pumpsales
|
